![W}X%82O~CLZD0LE8}]}%$FB.png](/storage/files/FLSMjAxNy8wNC8xOS8wMDA3!!25b749e0acd2465c93df6a9baa74be4c.png)
1. Electric system: Mitsubishi PLC system and human-machine interface control(Chinese & English language). Touch screen operation. Setting parameters , changing parameters, searching, monitoring, fault diagnosis and other functions are done by the touch screen. Components are durable.
2. Hydraulic system: Proportional pressure control. Using international famous hydraulic components. It is steady and reliable.
3. Plasticizing system: High efficiency of plasticizing mixing screw. Make sure the plasticizing fully and evenly.
4. Speed control system: Variable-frequency speed control and alloy steel hard tooth-face speed reducer. Speed control steadily. Low noise. Durable in use.
5. Clamping and mold-moving system: The girder arm, tripod position, central mold-lock clamping unit. Durable in use. Mold-lock pressure is balance. No deformation. Ball linear guide rail. It is high precision, low resistance and high speed.
6. Infrared safety electric eye. Automatic take out the product unit.
|
| TDZ-10L |
| Max.Product Volume | (L) | 10 |
| Station |
| Single |
| Dry cycle | (pc/h) | 600 |
| Screw Diameter | (mm) | 70 |
| Screw L/D ratio | (L/D) | 25 |
| Screw drive power | (KW) | 22 |
| Screw heating power | (KW) | 6.2 |
| No.of heating zone (Screw) | (ZONE) | 3 |
| Output of HDPE | (kg/h) | 90 |
| Hydraulic pump driving power | (KW) | 11 |
| Clamping force | (KN) | 95 |
| Platen distance | (mm) | 410-800 |
| Max.Size of Mold | (W*H) （mm） | 480*530 |
| Capacity of Accumulator head | （L） | 2 |
| Max.Die diameter (Single-head) | （mm） | 170 |
| Die heating power(Single-head) | （KW） | 8.7 |
| No.of heating zone (Single-head) | （ZONE） | 3 |
| Blowing pressure | （Mpa） | 0.8 |
| Air consumption | （M³/MIN） | 0.6 |
| Cooling water pressure | （Mpa） | 0.2-0.3 |
| Water consumption | （L/MIN） | 50 |
| Size of machine | （L*W*H）（ m） | 4.1*1.9*2.5 |
| Weight of machine | （TON） | 5 |
