1. Electric system: Mitsubishi PLC system and human-machine interface control (Chinese & English language). Touch screen operation. Setting parameters , changing parameters, searching, monitoring, fault diagnosis and other functions are done by the touch screen. Components are durable.
2. Hydraulic system: Proportional pressure control. Using international famous hydraulic components. It is steady and reliable.
3. Plasticizing system: High efficiency of plasticizing mixing screw. Make sure the plasticizing fully and evenly.
4. Speed control system: Variable-frequency speed control and alloy steel hard tooth-face speed reducer. Speed control steadily. Low noise. Durable in use.
5. Clamping and mold-moving system: Independent mold-open, mold- close, mold-lock and mold-moving. Linear ball rolling guide way and microns accuracy. High precision, convenience, energy saving and no deformation. TONGDA patent (tie-barless clamping unit and mold-lock system): Independent mold-lock system, mold-lock pressure is big and balance. It is easy to change the mold and it provides big space. Small cylinder for mold-open and mold-close. Mold-moving is fast and energy-saving. Equip robot to take out the products. Steady and safety.
6. Die head: Use good material, such as 38CrMoAlA, 42CrMoV, 35CrMo, etc. Precision Machining and heat treatment.
7. Convenient to change mold: Die head can be adjusted up and down together with the platform. It can be also adjusted forward and backward (hydraulic control). Leave space for assembling different kinds of mold. It is convenient to adjust the distance between die mouse and mold by up and down the die mold. This can make the flash minimum.
8. Low-energy: When the speed is about 70%, the energy consumption is about 78KW.h.
| Model | / | TDW-160EF |
| Max.Product Volume | (L) | 160 |
| Station | / | Single |
| Dry cycle | (pc/h) | 300 |
| Screw Diameter | (mm) | 100 |
| Screw L/D ratio | (L/D) | 28 |
| Screw drive power | (KW) | 75 |
| Screw heating power | (KW) | 24 |
| No.of heating zone (Screw) | (ZONE) | 5 |
| Output of HDPE | (kg/h) | 180-230 |
| Hydraulic pump driving power | (KW) | 32.7 |
| Clamping force | (KN) | 1200 |
| Platen distance | (mm) | 500-1900 |
| Max.Size of Mold | (W*H) （mm） | 1200*1900 |
| Capacity of Accumulator head | （L） | 18 |
| Max.Die diameter (Single-head) | （mm） | 510 |
| Die heating power(Single-head) | （KW） | 35.2 |
| No.of heating zone (Single-head) | （ZONE） | 6 |
| Blowing pressure | （Mpa） | 0.8 |
| Air consumption | （M³/MIN） | 2 |
| Cooling water pressure | （Mpa） | 0.4 |
| Water consumption | （L/MIN） | 180 |
| Size of machine | （L*W*H）（ m） | 5.8*2.9*4.4 |
| Weight of machine | （TON） | 22 |
