1.Machine Introduction
1. Adopt the new type double bend arm and four pull rod-clamping structure(won the patent). Cross direction; middle mould board is move parallel; the distance between two mold board is adjusted by the chain wheel. Thus, the clamping force is very strong.
2. The machine frame is produced by the whole complete casting bottom, so that the machine are firm and running stable.
3. Adopt the straight slide way, reduce the friction and lengthen the life of the machine.
4. Double start working button, which is designed for avoiding the injury.
5. Power saving design that can increase your profiST.
6. The single direction of pre-form placing and bottle picking, which is increase the output.
7. Segregate type air controlling system, which is designed for avoiding waste pollution.
8. The stretching air cylinder is adjusted parallel from front to back, from left to right freely by regulator.
2.Machine Paramete
TPYE: ST3L-C Semi-automatic bottle blow molding machine
Model No. | ST3L-C |
Theoretical output(pcs/hr) | 1200 |
Heating capacity(kw) | 9.8 |
Max bottle volume(L) | 2L(2cavity) |
Blowing pressure(Mpa) | ≤3.5 |
Motion pressure(Mpa) | ≤1.0 |
Max diameter * height(mm) | Φ140*H340 |
Mould thickness(mm) | 120-220 |
Weight(kg) | 850 |
Main machine(mm) | 1400*600*1700 |
Heater(mm) | 1750*650*1450 |
