Chiller:
used in cooling plastics mould and injector fuel tank
Japan RKC meter
Sweden AFLA valve style trans-heater
Water chiller
(1) It mainly suitable for cooling plastics mould and injector fuel tank. Through rapidly cooling, it will shorten the cycle time of operation so as to raise productivity and improve plastics quality.
(2) It also serves as a necessary refrigerating device for computerize tomography machine(CT) in hospital, chemical reaction pool, precision instrument, workshop and etc.
(3)Main Technical Parameter (Water Cooled)
Model | SML-2S | SML-3S | SML-4S | SML-6S | SML-7S | SML-9S | SML-10S | SML-11S | SML-12S |
Working Power Supply | Three-phase Four-wire,380V,50Hz |
Refrigerating Capacity(Kcal/h) | 6000 | 7500 | 12500 | 18000 | 22600 | 34000 | 47000 | 68000 | 94000 |
Compressor | Model | American BRISTOL Full-closed |
Ration Power(Hp) | 2 | 3 | 5 | 7.5 | 10 | 15 | 20 | 15×2 | 20×2 |
Refrigerant | R22 |
Operation Method | Japan RKC Full-automatic Adjustment |
Chilled Water | Evaporator Type | Sweden Imported Plate Heat Exchanger |
Outlet Temperature | 15(5-30) |
Frozen Water Flow(m3/h) | 3.2 | 3.2 | 6.3 | 6.3 | 8 | 16 | 16 | 18 | 22 |
Inlet and Outlet Pipe | 1" | 1" | 1" | 1" | 11/2" | 2" | 2" | 2-2" | 2-2" |
Cooling Water | Condenser Type | Sweden Imported Plate Heat Exchanger |
Outlet Temperature) | ≤36 |
Cooling Water Flow (m3/h) | 3 | 4 | 5 | 7 | 8 | 15 | 17.5 | 30 | 35 |
Inlet and Outlet Pipe | 1" | 1" | 1" | 1" | 1" | 11/2" | 11/2" | 2-11/2" | 2-11/2" |
Safety Protection Equipment | High, Low-pressure Water Breaking Anti-freezing Overload Short-phase |
Outside Dimension
(L×W×H)(mm) | 500×780×1300 | 1105×600×1400 | 1700×800×1200 | 2000×800×1700 |
Weight (kg) | 150 | 200 | 250 | 300 | 350 | 550 | 600 | 700 | 750 |
