Some of the important features:
Clamping system: Faster response, stable and high rigidity
Injection system: Accurate and flexible, lower rejection rate
Control system: Computer and simple operation,molding data memory system
Power system: Energy saving, high efficient and precise
Metal parts: The thickness of our frame, metal plate and wallboard are thicker than other company.
Other Information
Show High Precision: The accurate injection positioning,pressure, speed and pressure maintaining,to ensure the repeatability error of injection accuracy less than 0.3% to achieve precision molding.
Super EnergySaving Features: Compared with standard injection machine,the energy saving rate can reach 40%-70% for the same plastic production.
High Efficiency: Compared with standard machine,the total efficiency can increase by 10% and dragging capacity is can increase by18%.
High Response System:The system acceleration and deceleration performance is quite agile and force&speed regulation is very sensitive.The sampling processing speed can reach 100KHZ and system quick start time can reach 0.05s.
Maintain Stability and Reliability:The pressure or speed is stable and switch of pressure maintaining is smooth and accurate.
Low Oil Temperature:Avoid high pressure unloading and low oil temperature situation during operation.Improve the operation performance.promote using efficiency and save a large quantity of cooling water.
| INTERNATIONAL CLASS NO | 410/2980 |
| U STYLE SPECIFICATION | 410-PET |
| Screw type | Unit | A | B | C | D |
| Injection Unit |
|
| Screw diameter | mm | 70 | 75 | 80 | 85 |
| Screw L/D ratio | L/D | 25 | 25 | 25 | 25 |
| Shot volume(therretical) | cm 3 | 1501 | 1723 | 1960 | 2213 |
| Injection weight(PS) | g | 1871 | 2148 | 2444 | 2759 |
| Injection rate | g/s | 459 | 527 | 600 | 677 |
| Injection pressure | M Pa | 199 | 173 | 152 | 135 |
| Screw speed | rpm | 130 |
| Clamping unit |
|
| Clamping force | KN | 3800 |
| Open stroke | mm | 715 |
| Space between tie-bars(WxH) | mm x mm | 730x730 |
| Max mould height | mm | 780 |
| Min mould height | mm | 250 |
| Ejector stroke | mm | 180 |
| Ejector force | KN | 90 |
| Others |
|
| Max pump pressure | M Pa | 16 |
| Servo system power | KW | 37 |
| Heating power | KW | 29.3 |
| Numbers of heating area |
| 5+1 |
| Machine demension(LxWxH) | m | 7.65x2.05x2.6 |
| Oil tank cubage | L | 700 |
| Machine weight | t | 15.5 |
Remarks:The company reserves the right to modify the specification parameters without notice.
|
