YG machine is using three ties bar clamping frame design, with the die head rising function, together with the hydraulic vertical blowing pin and manual centralized lubrication system, faulty alarm and self-error diagnosis functions. Computer operation screen can monitor the action status and the action time, and can automatically calculate the output and automatic reset.
Apply to the production under 0.5 liter of PE, PP, EVA, the ABS, PVC, K, material, TPU, BARES, nylon and other materials of hollow plastic products; comparing to other company’s machine, this series has the following characteristics:
1) The screw is after strengthen and harden of cold treatment. This series of machines offers superior extruding ability and double plasticizing effect. Screw barrel is with high wear resistance;
2) Germany's Siemens Automatic Intelligent Control System for multi-language user interface is very convenient to operate，to set and modify the program;
3) Deep crystal surface treatment within the die head, curve runner, no dead ends, and the head of material storage product is not expected. It is easy to refuel & change color, and remove slag and clean die head.
4) Frequency inverter to control screw speed to ensure energy saving, you can adjusted the speed of the screw at random; Super hard guide pin wear resistance, shift mode resistance is extremely small, extremely fast;
5) Clamping cylinder is located in central lock template, the clamping force is evenly balanced and assure of the explosion-proof;
6) Imports Rexroth valve to control the volume and pressure, Taiwan Yuken oil valve and double-pump flow control;
7) The movement is smooth and fast, empty cycle of 4 seconds and small noise;
8) Compact and small size, a single low-power motor, inverter speed, low power consumption;
9) mold brake in addition to the use of imported oil buffer, soft-top position proximate switch is also available, thus the clamping plate shift position is more accurate, and of no vibration;
10) Increase the copper sleeve and high support top hydraulic buffers, greatly improving the stability of the action when the mechanical high-speed operation, reduces the force of the guide post, extending the life of clamping guide tie bar;
11) For the mold movement system was equipped with an automatic lubricating device, the maintenance of the mold movement system no longer dependent on artificial seek hole injection butter;
12) Extrusion platform can be adjusted up and down by the spiral movements;
13) In order to facilitate the use of recycled material, filter device for extrusion system is as a optional choice，and the down blow pin ,side blow pin and flash device is available.