YF-80 Extrusion Blow Moulding Machine is hydraulic, automatic hollow plastic molding machine with accumulator head. It is suitable for producing PE, PP, PS, ABS, EVA, PETG, AS and other materials hollow plastic containers in all shapes from 5 L to 80 L. This machine is widely used in such fields: chemical industry, petroleum, medicine, commodity, cosmetic, foods, lighting, tool, auto, motorcycle, shoemaking, toys and so on. It can produce plastic bucket, chemical drum, auto parts (water box, oil box, air-condition wind pipeline and empennage), tool boxes and bags, dust collector tube, chairs for bus and gymnasium, etc. Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble shooting, maintenance and other benefit. For its good quality and our perfect service, it’s your best choice to use it.
Characteristic：
1. Control Unit: Japan Mitsubishi PLC programmable controller and touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2. Hydraulic Unit: It adopts famous international brand hydraulic valve and seal, proportional control. And has features of high stationarity and reliability, accurate operation, long longevity, quick response and so on.
3. Extrusion Unit: Hard gear surface decelerator; Japan Mitsubishi inverter; Screw speed regulation adopts variable-frequency speed regulation control system. It has the features of stable rotate speed, powerful power, energy-saving and so on. Mixing screw has wide applicability to raw materials and the plasticization quality is even better. Energy-saving machine barrel and A-alloy heaters are adopted for heating.
4. Die Head Unit: With single cylinder material-center-in accumulator head, is smooth and dependable.
5. Clamping Unit: Single cylinder sliding tramroad, fast and balanced; four mould boards, high precision linearity leaders, double hydraulic cylinders bidirectional open-closing mould.
6. Parison Programmer: Wall-thickness controller( MOOG Japan or domestic)from 10 to 100 points is available.
7. Blow Fitting Unit: Down blowing fitting is equipped; up blowing fitting and side blowing fitting are available.
8. Mould knife: With pneumatic cylinder mould knife, fast and nicety.
9. Safety Unit: With the safe light screen transducer to insure the operator’s safety through the feeling assembly.
10. Electrical Components: All of the electrical components adopts the International advanced high-tech product.
Technical Parameter:
Model | YF- 80 |
Suitable Materials | PE、PP、AS… |
Output（Running Free） | Depend on bottle design | 370 pcs/h |
Product Volume | 1cavity | 5L～30L |
Die Head Amount | Piece | 1 |
Work Station Amount | Piece | 1 |
Extrusion Unit | Screw Diameter | 80mm |
Screw L/D Ratio | 25:1 L/D |
Screw Speed | 80 r/min |
Plasticizing Capacity | 100kg/h |
Number of Heating Zone on Screw | 4 |
Die Head Unit | Volume of Storage Jar | 4.5L |
Max Die-pin Diameter | 300mm |
Number of Heating Zone | 4 |
Mould Unit | 1 Cavity | 1 cavity |
Mold Board Space | 350～1200mm |
Clamping Force | 300 KN |
Power Unit | Electrical Source | 220/380V,3phase 50/60Hz |
Total Heating Power | 20 Kw |
Main Power | 22 Kw |
Screw Motor Power | 22 Kw |
Waterhead | Cooling Tower |
Air Supply Pressure | 0.6～0.8 MPa |
Auxiliary Equipments | Low Pressure Air Compressor 1 Set (requisite) | 1.0m3/1.0MPa |
crusher machine 1set | 65 |
mixing machine 1set | 200kg |
