一、Features
level of safety devices,
When a malfunction warning was issued show cause of the malfunction.
5 with stainless steel tank insulation, easy to clean.
6 with reverse phase protection and phase due to anti-ice protection.
7 This series chillers can be customized acid type.
二、Second, the configuration
Compressor: 2HP and 2HP 220V single-phase using the following Panasonic brand compressor; 6HP 6HP and the following (single head or dual head or more head this form) with the United States or the United States Valley Lun Tai brand compressor; 8HP single head using Mitsubishi compressor; 10HP and 10HP more than the Mitsubishi Heavy Industries compressor.
Condenser: Shell and tube condenser used (imported high-thread copper tube) tube type.
Evaporator: 15HP and 15HP or below with coil type (high-purity copper pipe imported from Taiwan, around 16 laps); 15HP or more (excluding 15HP) the use of shell and tube evaporator. (Note: If you use a closed tank, it is recommended the use of shell evaporator)
Pump: The Taiwan source licensing legislation
Dry filter: The United States ALCO
Temperature table: The Italian production Yini Willie Brand
Electric: The card or the German Schneider Shihlin Taiwan
High Low Table: Taiwan jiver
Fault display board: The single chip
Sheet Metal: The A3 2mm thick steel plate? 1.2mm Windshield
Paint: Automotive Paint
Management: All pipes are all copper, and using seamless welding
Note: The above configuration even factory standard machine configuration, if special requirements are tailor-made according to special requirements!
三、Technical parameters
| Model | UNIT | HY-04A-04 | HY-04A-05 | HY-04A-08 | HY-04A-10 | JHY-04A-12 | HY-04A-15 | JHY-04A-20 | HY-04A-25 | HY-04A-30 | HY-04A-40 |
Cooling capacity | Kw | 11.9 | 15 | 23.8 | 30.5 | 34.3 | 45 | 61 | 69 | 92 | 122 |
Kcal/h | 10234 | 12900 | 20468 | 26230 | 39498 | 38700 | 52460 | 59340 | 79120 | 104920 |
Compressor | Input power | Kw | 3 | 4.5 | 3×2 | 4.5×2 | 10 | 4.5×3 | 9×2 | 10×2 | 9×3 | 9×4 |
Rated Power | Hp | 4 | 5 | 4×2 | 5×2 | 12 | 5×3 | 10×2 | 12×2 | 10×3 | 10×4 |
Evaporator | Type | Evaporator coil | Shell and tube evaporator |
Pipe diameter | lnch | 1 | 1 | 2 | 2 | 2 | 2 | 2-1/2 | 2-1/2 | 2-1/2 | 3 |
Frozen media | Type | R22 |
Filling volume | Kg | 2 | 2.5 | 4 | 5 | 5 | 7.5 | 11 | 11 | 12 | 18 |
Air-cooled condenser | Type | Efficient fin condenser |
Cooling water | L/min | 65 | 70 | 100 | 110 | 150 | 170 | 330 | 270 | 330 | 480 |
Water tank capacity | Liter | 50 | 50 | 70 | 70 | 125 | 125 | 150 | 140 | 150 | 180 |
Pumps | Power | Kw | 0.75 | 0.75 | 1.5 | 1.5 | 2.2 | 2.2 | 4 | 4 | 4 | 4 |
hp | 1 | 1 | 2 | 2 | 3 | 3 | 5 | 5 | 5 | 5 |
Flow | l/min | 60 | 60 | 100 | 100 | 200 | 200 | 400 | 400 | 400 | 400 |
Diameter | Cold water outlet | luch | 1/2×4 | 1/2×4 | 2 | 2 | 2 | 2 | 2-1/2 | 2-1/2 | 2-1/2 | 3 |
Cold water back to the mouth | luch | 1/2×4 | 1/2×4 | 2 | 2 | 2 | 2 | 2-1/2 | 2-1/2 | 2-1/2 | 3 |
Dimensions | Water | cm | 97×56
×97 | 97×56
×97 | 158×75
×139 | 158×75
×139 | 158×75
×139 | 204×80
×149 | 210×85 ×151 | 210×85
×151 | 224×88
×151 | 265×95
×160 |
Air | cm | 120×63
×108 | 125×68
×113 | 182×85
×169 | 182×92
×181 | 182×100
×181 | 195×105
×181 | 230×128
×200 | 230×138
×200 | 240×138
×200 | 320×148
×210 |
四、Remarks
1 Cooling capacity is based on: chilled water out of the water temperature is 12 ℃ / 7 ℃, cooling out of the water temperature 30 ℃ / 35 ℃
2 Scope of work: chilled water temperature range: 5 ℃ to 35 ℃; chilled water entering and leaving water temperature: 3 ℃ to 8 ℃. In the condensing temperature is not higher than 35 ℃ environments
* If the parameters or dimensions are subject to change without notice *
