ACCUMULATOR BLOW MOULDING MACHINE
KLB100 extrusion blow molding machine, which is produced by our company, is mainly applicable to the production of blowing barrels, motorcar gasoline tank, toolbox and other large plastic hollow products.
It consists of main machine, electric, hydraulic, pipe and other selection functional parts.
The main machine in including: extrusion device; accumulator head; clamping unit; frame; functional blowing device (optional); and manipulator (optional), etc.
Electric system in including: the heating and temperature controlling system of die-head and extruder; parison controlling system (optional); PLC and related
safe-guarding system.
Hydraulic system: hydraulic supply and its pressure, direction, flow controlling parts.
Pipeline parts: distribution of machine pipe, including oil, water and air pipe.
The shaping principle is “extruding- blowing”.The extruder adopts inverter to adjust、the speed to get the great timing range, which could meet the producing requirements for different products. The fused plastic plasticized by the extruder, is extrude into the accumulator head. When it reaches a certain volume, parison controller (optional) will constantly change the opening range of the die. And then it is injected into mould and blown out the products. Finally the manipulator (optional) will take the product out. Thus a complete circle finished.
Specification
KLB100
Material
PE.PP.ABS…
Max container capacity
L
120/160
Output(dry Cycle)
pc/nr
350
Dimension(L×W×H)
M
6.0×3.1×4.8
Total weight
ton
17
Clamping Unit
Clamping force
KN
500
Platen opening stroke
mm
550-1400
Platen size
mm
1050×1100
Max mould size(W×H)
mm
900×1200
Mould thickness
mm
560-650
System Pressure
Mpa
16
Power
Total power
Kw
150/170
Fan power for screw
Kw
1
Oil pump power
Kw
37
Air pressure
Mpa
1.2
Air consumption
m3/min
1
Average energy consumption
KW/h
65/75
Servo motor power
Kw
4
Extruder unit
Screw diameter
mm
100
Screw L/D ratio
L/D
25
Plasticising capacity
Kg/hr
180/220
Number of heating zone
zone
5
Extruder heating power
KW
30
Extruder driving power
KW
55/75
Die-head
Power of die heating
KW
24
max diameter of head tooling
mm
500
Accumulator capacity
L
14/16
