Injection Stretch Blow Moulding Machine
One step molding machine has the advantage that flexible and high effective four station process.
Because one step molding machine can use the heat which is kept in perform molding process effectively, so total of used power is much lower than two steps molding machine, the freedom of molding is higher, it would be much suitable for special shape container or other material container accept PET, PC, PP material to produce our high qualtiy bottles.
JG-SFF-120 Medicine special container(eye drops bottle, testing small container)
| Item | Unit | Data |
| Screw Diameter | mm | 30 |
| theoretical injection capacity | g | 128 |
| injection clamping force | kn | 120 |
| blow clamping force | kn | 30 |
| motor power | kw | 11 |
| heater capacity | kw | 5.8/4 |
| operating air pressure | mpa | 0.7-0.9 |
| blowing pressure | mpa | 2-3 |
| cooling water | bar | 1-3 |
| dimension of machine | cm | 300x128x285 |
| machine weight | kg | 3000 |
| suitable materials | PET PP |
JG-SFF-210 Cosmetics, health care products special packing
| Item | Unit | Data |
| Screw Diameter | mm | 35-40 |
| theoretical injection capacity | g | 184-220 |
| injection clamping force | kn | 210 |
| blow clamping force | kn | 80 |
| motor power | kw | 18.5-20 |
| heater capacity | kw | 6.4/4.7 |
| operating air pressure | mpa | 0.7-0.9 |
| blowing pressure | mpa | 2-3 |
| cooling water | bar | 1-3 |
| dimension of machine | cm | 330x128x285 |
| machine weight | kg | 3100 |
| suitable materials | PET PP Tritan |
JG-SFF-350 Milk bottle, food special packing
| Item | Unit | Data |
| Screw Diameter | mm | 40-48 |
| theoretical injection capacity | g | 220-410 |
| injection clamping force | kn | 350 |
| blow clamping force | kn | 80 |
| motor power | kw | 22 |
| heater capacity | kw | 9.4/4 |
| operating air pressure | mpa | 0.7-0.9 |
| blowing pressure | mpa | 2-3 |
| cooling water | bar | 1-3 |
| dimension of machine | cm | 380x140x285 |
| machine weight | kg | 4000 |
| suitable materials | PET PP Tritan |
JG-SFF-500 5 gallon PC jerrycan special packing)
| Item | Unit | Data |
| Screw Diameter | mm | 70-75 |
| theoretical injection capacity | g | 1060-1500 |
| injection clamping force | kn | 500 |
| blow clamping force | kn | 300 |
| motor power | kw | 55-75 |
| heater capacity | kw | 18/4 |
| operating air pressure | mpa | 0.7-0.9 |
| blowing pressure | mpa | 2-3 |
| cooling water | bar | 1-3 |
| dimension of machine | cm | 710x230x500 |
| machine weight | kg | 3000 |
| suitable materials | PET PP
|
