Uses:
SMP series of high-speed turbo mill in digestion and absorption of foreign advanced equipment on the basis of domestic and foreign customers to meet the needs of well-designed and developed successfully. He is a polished rigid PVC and other plastic products ideal equipment, processing and production process for plastic recycling scrap of special equipment. The plastic factory professional practice operated to demonstrate, grinding powder in the processing of the formula by adding 20-30% of its products, new materials chemistry and physics performance of the indicators remain unchanged. Therefore, the plastic products factory down the savings to solve the problem of waste accumulated defective set.
Features：
Working part of the machine cutter, high-speed particles in the latter part of the tooth plate impact was crushed by suction out, while larger particles will continue to impact, crushing out after. This reduces the cutter load and improve milling efficiency, but also enables the powder to be uniformly cooled.
Low temperature is the main advantage of the machine. By mechanical equivalent of heat: 860 per hour of work after the conversion to kcal. This machine is outside the ventilation, the wind reached 50m3/kw, the inlet and outlet temperature, take away most of the heat. Small part of the heat from the water cooling solution. Requirements: the cooling water inlet temperature is not greater than 25 degrees, the outlet temperature is not greater than 45 degrees in the summer due to increase cold water flow to reduce the temperature.
Cabinet door and pipe joints are equipped with seals, gaskets, ensure no dust escapes. Discharge port is located on the fan, the exhaust port has 16 holes dust bag, ensure that the work environment clean, clean. |
